19.Replacement parts and accessories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools.
20.Do not operate tool if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool.
21.Use proper size and type extension cord. If an extension cord is required, it must be of the proper size and type to supply the correct current to the tool without heating up. Otherwise, the extension cord could melt and catch fire, or cause electrical damage to the tool. This tool requires use of an extension cord of 0 to 10 amps capability (up to 50 feet), with wire size rated at 18 AWG. Longer extension cords require larger size wire. If you are using the tool outdoors, use an extension cord rated for outdoor use (signified by “WA” on the jacket).
22.Maintenance. For your safety, maintenance should be performed regularly by a quali- fied technician.
23.Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
Note: Performance of this tool (if powered by line voltage) may vary depending on variations in local line voltage. Extension cord usage may also affect tool performance.
Unpacking
When unpacking, check to make sure the parts listed on page 6 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.
Figure 1
Power Cord
Carbon Brush | Torque | |
(another one on the bottom of the tool) | ||
Switch | ||
| ||
Chuck |
|
Side Handle |
|
|
|
|
| ||
Note: The Side | Handle |
|
|
|
|
| |
fits on either side. |
|
|
|
|
| ||
Direction Switch | Trigger |
|
| ||||
Just unscrew it and | Lock Button | ||||||
|
|
| |||||
thread it into the |
|
|
| ||||
|
|
|
|
| |||
preferred side. |
|
|
|
|
| ||
SKU 47991 | For technical questions, please call | Page |