MAINTENANCE AND TROUBLE-SHOOTING
Inspect and tighten all parts of the elliptical crosstrainer regularly. Replace any worn parts immediately.
For smooth operation of the elliptical crosstrainer, the incline frame should
be kept clean. Using
a soft cloth and mild detergent, clean dust
and other residue from the incline frame where the wheels make contact with it. Other parts of the
elliptical crosstrainer can also be cleaned in this man- ner. Never use abrasives or solvents.
HOW TO LEVEL THE ELLIPTICAL CROSSTRAINER
If the elliptical |
|
|
crosstrainer |
|
|
does not sit |
|
|
flat on the |
| Jam |
floor, one or |
| |
both of the | Pad | Nut |
leveling pads |
| |
|
| |
should be |
|
|
adjusted. First, |
|
|
loosen the jam |
|
|
nut on each |
|
|
leveling pad. |
|
|
Next, turn the |
|
|
leveling pads as needed until the elliptical crosstrainer is level. When the leveling pads are properly adjusted, firmly retighten the jam nuts.
PULSE SENSOR TROUBLE-SHOOTING
¥Avoid moving your hands while using the pulse sen- sor. Excessive movement may interfere with heart rate readings.
¥Do not hold the metal contacts too tightly; doing so may interfere with heart rate readings.
¥For the most accurate heart rate reading, hold the metal contacts for about 15 seconds.
¥For optimal performance of the pulse sensor, keep the metal contacts clean. The contacts can be cleaned with a soft clothÑnever use alcohol, abrasives, or chemicals.
MOVING THE ELLIPTICAL CROSSTRAINER
Before moving the |
| |
elliptical crosstrainer, | Handlebar | |
adjust the incline to |
| |
the highest setting by |
| |
pressing the INCLINE |
| |
▲ button. Wait until |
| |
the incline frame |
| |
has stopped moving |
| |
and then unplug the | Incline | |
power cord. | ||
Frame | ||
| ||
Stand in front of the |
| |
elliptical crosstrainer, |
| |
hold the handlebar | Rollers | |
firmly, and tip the |
| |
elliptical crosstrainer |
| |
forward until it can be |
| |
moved on the two |
|
front rollers. Carefully move the elliptical crosstrainer to the desired location.
16
