ASSEMBLY
Assembly requires two people. Place all parts of the elliptical crosstrainer in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
The following tools are required for assembly: the included allen wrenches 
and your own
phillips screwdriver 
adjustable wrench 
and rubber mallet 
.
As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 18. The second number refers to the quantity used in assembly. Note: Some small parts may have been
M8 Split | M10 Split | M8 Washer | Curved | M10 Flat |
Washer (85)Ð4 | Washer (73)Ð4 | (89)Ð4 | Washer (74)Ð4 | Washer (94)Ð5 |
M4 x 16mm | M4 x 16mm | M8 x 19mm Button | Console Plate | M10 Nylon |
Screw (60)Ð5 | Flange Screw | Screw (76)Ð4 | Screw (39)Ð4 | Locknut (55)Ð6 |
| (88)Ñ6 |
|
|
|
Patch Bolt (90)Ð1 |
| Handlebar Bolt (92)Ð4 |
| |
|
| Carriage Bolt (2)Ð2 |
| |
4
