11.Apply a small amount of grease to the axle on the left Crank Arm (8).
Side a Nylon Washer (78) and the Left Pedal Leg (5) onto the axle on the left Crank Arm (8). Note: It may be helpful to use a rubber mallet to tap these parts on.
Be careful not to confuse the Left Pedal Leg with the Right Pedal Leg (not shown); look at the posi- tion of the round tube to correctly identify the Left Pedal Leg. Next, tap a 3/4Ó Axle Cap (40) onto the axle.
Attach the Right Pedal Arm (not shown) in the same way.
11 |
|
| Grease |
5 | 8 |
| |
| 78 |
| 40 |
| Round |
| Tube |
12.Make sure that all parts of the elliptical crosstrainer are properly tightened. Note: There may be some hardware left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the elliptical crosstrainer.
8
