Wayne SSPT33 Replacement Parts List, For Replacement Parts, call, Specifications, Construction

Operating Instructions And Parts Manual

Replacement Parts List

•Only use factory parts to repair this pump.

For Replacement Parts, call 1-800-237-0987

Please provide following information:			Address parts correspondence to:
-Model number			Wayne Water Systems
-Serial number (if any)			101 Production Drive
-Part description and number as shown in parts list			Harrison, OH 45030
			Part Numbers for Models
	Ref.		CDT33	SPT33, SPT50
	No.	Description	CDT50	SSPT33, SSPT50
1.		Tether Float Switch Kit	60022-001	60022-001
2.		Top Cover Kit	60030-001	60030-001
3.		Impeller Plate	15958	15958
4.		Impeller	60000-001	60000-001
5.		Volute	60016-001	60007-001

Specifications

Power supply requirements	......120V, 60 hz
Motor	Single phase, oil filled
Horsepower	1/3 HP (CDT33, SPT33, SSPT33)
....................................................	1/2 HP (CDT50, SPT50, SSPT50)
Liquid temperature range	40°F to 120°F
Circuit requirements	15 amps (min)
Dimensions	111/2” high x 93/4” base
Cut-in level (factory set)	13”
Cut-out level (factory set)	7”

Construction

Motor housing	.................Cold rolled steel
Volute	Cast iron (CDT33, CDT50)
..........................................	Glass Reinforced Thermoplastic
	(SPT33, SPT50, SSPT33, SSPT50)
Impeller	Glass reinforced thermoplastic
Shaft	Low carbon steel
Seals	Buna N
Discharge	11/2” NPT
Motor Cover	Glass reinforced thermoplastic

www.waynewatersystems.com

3