Harbor Freight Tools 65309 manual Basic Specifications, Unpacking, Set Up Instructions

Basic Specifications

PTO Operating	540 RPM
Speed
PTO Power	At Least 25 HP
Output Shaft	1-3/8” diameter shaft with
	6-tooth spline
Rated
Continuous	15,000 Watts
Output
Rated Maximum	16,000 Watts
Output
Phase	1 (single) phase
	• 12 VDC, 8 A, 2-prong outlet
	• 2 X 125 V~, 20 A, duplex
	GFCI outlets (5-20R)
Receptacles	• 125 V~, 30 A 3-blade twist
	lock outlet (L5-30R)
	• 125/250 V~, 50 A 4-prong
	outlet (14-50R)

Unpacking

When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.

Included components: a. Generator unit

b. PTO shaft c. PTO guard

To prevent serious injury

from accidental starting:

Turn the Power Switch of the equipment to its “OFF” position, wait for the engine to cool, and disable the engine before assembling or making any adjustments to the equipment

To prevent serious injury

from Electrical Shock: A licensed electrician must do all installation work, including earth-ground connection.

Keep this generator and all electrical wires, cords and components dry.

Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.

Set Up Instructions

Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

1.Attach the PTO (power Take-Off) Shield to the Generator using the supplied bolts and washers. Ad- just and tighten securely, as shown above.

SKU 65309 For technical questions, please call 1-800-444-3353. Page 8