(109) and that the tabs are on the INSIDE slot of the Splitter.

8.Use a framing square (not included) to make sure the Saw Blade and Splitter assembly are square. If not square, loosen the Splitter Bracket and adjust until the Splitter is properly aligned with the Saw Blade. Then tighten all screws and bolts.

Mounting

1.The Saw MUST be properly secured to the supporting surface using the four mounting holes at each corner of the Base (5).

2.If mounting Table Saw to a leg stand (not included), insert screws through the holes in each corner and into the pre-drilled holes in the leg stand.

Tighten together using washers, flat washers and nuts (hardware not included.)

3.If placing Table Saw on support sur- face, insert the Rubber Feet (1) into each corner of the Base to dampen the vibration.

Please note: Before the Table Saw is placed on supporting surface, please verify that supporting surface has a 11”-12” square hole to allow for saw- dust to fall through and be removed.

4.If the supporting surface does not have the hole, square the Table Saw on the supporting surface and mark the location of the four 5/16” holes to be drilled.

5.Locate and mark an 11”-12” square that is centered between the four mounting holes. Once marked, cut out and remove the square. This

will allow sawdust to fall through the Table Saw’s Base.

6.Securely fasten the Table Saw to the supporting surface using washers, flat washers and nuts (hardware not included.)

7.WARNING! Failure to provide this sawdust removal hole will allow sawdust to build up around the mo- tor, which can potentially lead to a fire hazard and/or damage the motor assembly.

Operating Instructions

Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.

Table Saw Adjustments

To prevent serious injury

from accidental operation:

Turn the Power Switch of the tool to its “OFF” position, remove key, and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.

WARNING! Check the Blade Guard assembly before and after every use.

SKU 66630

For technical questions, please call 1-800-444-3353.

Page 11

Page 10 Page 12
Page 11
Image 11
Harbor Freight Tools 66630 operating instructions Operating Instructions, Mounting, Table Saw Adjustments
Page 10 Page 12

66630 specifications

Harbor Freight Tools 66630 is a versatile six-gallon portable air compressor that caters to both novice DIY enthusiasts and seasoned professionals. Its compact and lightweight design makes it easy to transport, while still delivering robust performance for a wide range of applications.

One of the standout features of the 66630 is its powerful 1.5 horsepower motor, which is designed for maximum efficiency and durability. The motor operates at a low RPM, reducing wear and tear while ensuring quieter operation. With a maximum pressure of 125 PSI, this air compressor is capable of handling a variety of pneumatic tools such as nail guns, airbrushes, and impact wrenches, making it a valuable addition to any toolbox.

The 66630's six-gallon vertical tank design maximizes air storage without taking up excessive floor space. This feature is particularly advantageous for those who have limited workshop areas. The tank is made of high-quality steel, providing durability and resistance to rust and corrosion, which prolongs the compressor's life.

In terms of technologies, the Harbor Freight Tools 66630 utilizes an oil-free pump system. This means less maintenance is required, as users do not need to worry about oil changes or oil spills. The oil-free pump also contributes to cleaner air output, making it more suitable for tasks like painting or inflating sports equipment.

Safety is another priority with this compressor. It is equipped with a thermal overload protector that prevents the motor from overheating during prolonged use. The built-in pressure regulator allows users to adjust and control air pressure, ensuring compatibility with various tools and applications.

Additionally, the 66630's ergonomic handle and rubber feet enhance portability and stability. The handle provides a comfortable grip for easy transport, while the rubber feet reduce vibrations, ensuring the compressor remains stable during operation.

Overall, the Harbor Freight Tools 66630 air compressor stands out for its combination of power, portability, and user-friendly features. Its versatility makes it suitable for various tasks, from home repairs to professional projects, solidifying its place as a reliable tool in any workshop. Whether for inflating tires, powering tools, or completing a range of home improvement tasks, the 66630 provides the performance needed to get the job done efficiently.
Top Page Image Contents