Work Piece and Work Area Set Up

1.Designate a work area that is clean and well-lit. The work area must not allow access by children or pets to prevent injury and distraction.

2.Route the power cord along a safe route to reach the work area without creating a tripping hazard or exposing the power cord to possible damage. The power cord must reach the work area with enough extra length to al- low free movement while working.

3.Secure loose work pieces using a vise or clamps (not included) to pre- vent movement while working.

4.There must not be hazardous ob- jects, such as utility lines or foreign objects, nearby that will present a hazard while working.

General Operating Instructions

1.The ON/OFF Switch (17) is located on the Table Saw’s front panel. To activate the Table Saw, turn the switch to “ON”. To turn off the Table Saw, turn the switch to “OFF.”

2.When the Table Saw is “OFF,” keep the Switch locked in the OFF posi- tion. Do this by grasping the Switch and pulling it out of the Switch Box (21). The Table Saw will not operate with the Switch removed.

3.Please note: The Switch can be removed while the Table Saw is run- ning. But it cannot be restarted with- out inserting the Switch back into the Switch Box.

4.The Table Saw is also equipped with a manual reset overload protector. If the motor shuts off or fails to start

because of overloading (such as cut- ting stock too fast or when using a dull blade), first turn the Switch to the “OFF” position.

5.Remove the stock and check Blade condition.

6.Let the motor cool for 3-5 minutes and push the Reset Button (16), which will reset the overload device. Turn the motor on by turning the Switch to “ON.”

7.WARNING! Be sure to immediately turn off the Table Saw if the overload protector stops the motor.

Avoiding Kickback

1.The Table Saw can be used for straight-line cutting, such as cross cutting, ripping, mitering, beveling and compound cutting. However, kickback can occur when the Blade stalls, a cut is made at an incorrect depth, or you saw into a knot or nail. To avoid kickback, do the following:

2.Use the correct blade depth setting. The top blade teeth should clear the workpiece by 1/8” to 1/4”.

3.Inspect the workpiece for knots or nails before beginning a cut. Knock out any loose knots with a hammer and do not saw into loose knot or nail.

4.Use the Fence when rip cutting and the Miter Gauge when cross-cutting.

5.Use clean, sharp and properly-set blades. Do not use dull blades.

6.Support the workpiece properly to avoid pinching.

SKU 66630

For technical questions, please call 1-800-444-3353.

Page 15

Page 14 Page 16
Page 15
Image 15
Harbor Freight Tools 66630 Work Piece and Work Area Set Up, General Operating Instructions, Avoiding Kickback
Page 14 Page 16

66630 specifications

Harbor Freight Tools 66630 is a versatile six-gallon portable air compressor that caters to both novice DIY enthusiasts and seasoned professionals. Its compact and lightweight design makes it easy to transport, while still delivering robust performance for a wide range of applications.

One of the standout features of the 66630 is its powerful 1.5 horsepower motor, which is designed for maximum efficiency and durability. The motor operates at a low RPM, reducing wear and tear while ensuring quieter operation. With a maximum pressure of 125 PSI, this air compressor is capable of handling a variety of pneumatic tools such as nail guns, airbrushes, and impact wrenches, making it a valuable addition to any toolbox.

The 66630's six-gallon vertical tank design maximizes air storage without taking up excessive floor space. This feature is particularly advantageous for those who have limited workshop areas. The tank is made of high-quality steel, providing durability and resistance to rust and corrosion, which prolongs the compressor's life.

In terms of technologies, the Harbor Freight Tools 66630 utilizes an oil-free pump system. This means less maintenance is required, as users do not need to worry about oil changes or oil spills. The oil-free pump also contributes to cleaner air output, making it more suitable for tasks like painting or inflating sports equipment.

Safety is another priority with this compressor. It is equipped with a thermal overload protector that prevents the motor from overheating during prolonged use. The built-in pressure regulator allows users to adjust and control air pressure, ensuring compatibility with various tools and applications.

Additionally, the 66630's ergonomic handle and rubber feet enhance portability and stability. The handle provides a comfortable grip for easy transport, while the rubber feet reduce vibrations, ensuring the compressor remains stable during operation.

Overall, the Harbor Freight Tools 66630 air compressor stands out for its combination of power, portability, and user-friendly features. Its versatility makes it suitable for various tasks, from home repairs to professional projects, solidifying its place as a reliable tool in any workshop. Whether for inflating tires, powering tools, or completing a range of home improvement tasks, the 66630 provides the performance needed to get the job done efficiently.
Top Page Image Contents