edge of the square until it touches the marked tooth.

7.Rotate the Blade and check the same marked tooth at the rear of the Table Saw.

8.If the front and rear measurements are not identical, have a qualified ser- vice technician repair the Table Saw.

Installing/Replacing Saw Blade

1.WARNING! Make sure to unplug Table Saw before making any install- ing or replacing Blade.

2.WARNING! Use only a 10” diameter saw blade rated at 4800 RPM and with a 5/8” arbor hole.

3.Remove the Blade Guard, raise the Saw Blade to its maximum height and remove the Table Insert.

4.Use the Wrench (145) to keep the Saw arbor from rotating while using the Pin Wrench (147) to remove the Arbor Nut. Turn the nut counterclock- wise to remove. Then remove the Outer Flange (97) and the Blade.

5.Place new 10” Blade onto the Arbor Shaft (94), making sure the teeth point DOWN at the front of the Table Saw.

6.WARNING! The teeth MUST point down toward the front of the Table Saw for proper operation. See Figure B, above. Incorrect blade installation can damage the Saw Blade, Table Saw and/or workpiece.

FENCE (146)

FRONT

OF

TABLE

SAW

Wood

Block

FIGURE B

7.Place the Outer Flange onto the Ar- bor Shaft. Be sure the hollow side of the Flange is against the Blade and that all pieces are sung against the arbor housing.

8.Thread the Arbor Nut back onto the Arbor. Tighten with the Wrench (145), turning the nut clockwise and holding the Arbor steady with the Pin Wrench.

9.Rotate the Blade to make sure it turns freely. Then lower the Blade.

10.Replace the Table Insert and retight- en the Table Insert screw.

11.WARNING! Do not overtighten screw. Doing so can cause the Table to bow or bend, leading to serious injury.

SKU 66630

For technical questions, please call 1-800-444-3353.

Page 14

Page 13 Page 15
Page 14
Image 14
Harbor Freight Tools 66630 operating instructions Installing/Replacing Saw Blade, Figure B
Page 13 Page 15

66630 specifications

Harbor Freight Tools 66630 is a versatile six-gallon portable air compressor that caters to both novice DIY enthusiasts and seasoned professionals. Its compact and lightweight design makes it easy to transport, while still delivering robust performance for a wide range of applications.

One of the standout features of the 66630 is its powerful 1.5 horsepower motor, which is designed for maximum efficiency and durability. The motor operates at a low RPM, reducing wear and tear while ensuring quieter operation. With a maximum pressure of 125 PSI, this air compressor is capable of handling a variety of pneumatic tools such as nail guns, airbrushes, and impact wrenches, making it a valuable addition to any toolbox.

The 66630's six-gallon vertical tank design maximizes air storage without taking up excessive floor space. This feature is particularly advantageous for those who have limited workshop areas. The tank is made of high-quality steel, providing durability and resistance to rust and corrosion, which prolongs the compressor's life.

In terms of technologies, the Harbor Freight Tools 66630 utilizes an oil-free pump system. This means less maintenance is required, as users do not need to worry about oil changes or oil spills. The oil-free pump also contributes to cleaner air output, making it more suitable for tasks like painting or inflating sports equipment.

Safety is another priority with this compressor. It is equipped with a thermal overload protector that prevents the motor from overheating during prolonged use. The built-in pressure regulator allows users to adjust and control air pressure, ensuring compatibility with various tools and applications.

Additionally, the 66630's ergonomic handle and rubber feet enhance portability and stability. The handle provides a comfortable grip for easy transport, while the rubber feet reduce vibrations, ensuring the compressor remains stable during operation.

Overall, the Harbor Freight Tools 66630 air compressor stands out for its combination of power, portability, and user-friendly features. Its versatility makes it suitable for various tasks, from home repairs to professional projects, solidifying its place as a reliable tool in any workshop. Whether for inflating tires, powering tools, or completing a range of home improvement tasks, the 66630 provides the performance needed to get the job done efficiently.
Top Page Image Contents