Page 8 For technical questions, please call 1-800-444-3353. SKU 66687
the code, press ENTER. The LED will
ash.
Press the Device Select Control 7.
button (CABLE, TV, VCR, DVD OR
SAT) that you programmed. The LED
will blink once.
Press the ON/OFF button. If the 8.
device you are programming turns
off, you may have found the correct
code. Press the ON/OFF button
again. If the device turns on, you
have found the correct code. If the
device does not turn back on, this
is not the correct code and you will
need to try again with a different code
from the list or use one of the other
following methods to nd the code
with the remote.
Use the Personal Code Reference 9.
chart at the back of this manual to
record your codes for easy reference.
Finding the code with the remote
Manually turn on the device to be 1.
controlled.
Press and hold the Code Search 2.
Button until the LED stays on.
Release the Code Search Button.
Point the Remote at the device and 3.
press then release the Device Select
Control button (CABLE, TV, VCR,
DVD OR SAT) to select that unit.
Point the Remote at the device 4.
and press and release the ON/OFF
Button. The LED will ash once, each
time you press the ON/OFF Button.
Keep doing this slowly until the
device turns off. It may take up to 300
times to reach the correct code since
you will be searching through all the
codes.
When the device turns off, 5.
immediately press and release the
ENTER button to store the code for
that device.
Press the ON/OFF button and the 6.
device should turn on (this ensures
that the code was properly stored in
the remote for that device).
Test all other buttons on the Remote 7.
to verify they work properly.
note: When the Remote is set and no
keys have been pressed for fteen
seconds, the Code Search feature
will automatically turn off.
using the remote
Since the Remote controls more 1.
than one device, you must “tell” the
Remote which device you wish to
operate. If you wish to operate your
TV, you must rst press the TV key to
put the Remote in the TV mode.
The Remote will stay in the selected 2.
mode (such as TV) until it is changed.
If your Remote is in TV mode, you
must change the mode to operate
other devices like DVD, VCR, satellite
receiver or cable box. For example, if
the Remote is in VCR mode and you
wish to turn off the TV, rst press the
TV key before pressing the ON/OFF
Button.
on-screen menus-accessing and selecting menu items
Many devices have on screen menus
to help you navigate through their
features and functions. Although this