Page 9For technical questions, please call 1-800-444-3353.SKU 66687
remote can not access every menu
setting of every device, it does allow
access to some device’s menus.
To use a device’s on-screen menu 1.
system, rst turn on the TV and the
device you want to access.
Press and release the TV button to 2.
access TV mode.
Press and release the INPUT button 3.
several times to toggle through the
video sources until the TV is selected.
Press and release the Device Select 4.
Control button (CABLE, TV, VCR,
DVD OR SAT) of the menu you wish
to access.
Press and release the Menu button. 5.
The LED will blink, indicating you are
in Menu mode.
Use the Volume and Channel control 6.
buttons to navigate through the on-
screen menu system.
To make a selection from the on-7.
screen Menu, press the MENU, OK,
INFO, and then ENTER keys to
select the highlighted item.
note: If the Remote does not respond,
make sure the LED light is still
blinking. Remember, it times out
after fteen seconds. If this happens,
press the Menu Button again and
retry selection.
The Remote automatically times out 8.
of Menu mode after fteen seconds
without a key being pressed. Once
this happens, the Remote will clear
the displayed menu from the TV.
If you wish to exit the menu yourself, 9.
press the corresponding device key
on the Remote (TV, DVD, VCR, etc.)
The LED light will turn off.
sleep timer
This feature allows the TV to turn off
automatically after a specied length
of time. It can range from 1 to 99
minutes.
note: The Sleep Timer only works if you
are programmed to your TV mode
and have the Remote aimed at the
TV.
To program the Sleep Timer, rst 1.
press and release the TV Button.
Press and hold the Sleep Button for 2.
ve seconds. The LED light will turn
on.
Release the Sleep Button.3.
Using the number keys, enter the 4.
desired time in minutes (from 1 to
99). To set the Timer to a time that
is under ten minutes, press “0” and
then the desired number (“05” for
ve minutes.) The LED will blink with
each pressed key.
Once the second number is entered, 5.
the LED turns off and the Sleep Timer
is now set.
Leave the remote aimed at the TV. 6.
Once the Sleep Timer is set, you can
continue to use the remote without
affecting the Sleep Timer. However,
because the timing mechanism
for the Sleep Timer is built into the
Remote itself, the remote must be
in TV mode and pointed at the TV to
activate the Sleep Timer.
note: If you press any key other than the
numbers, they will be ignored. You