ing parts, breakage of parts and any other condition that may af- fect the power tool’s operation. If damaged, have the power tool re- paired before use. Many accidents are caused by poorly maintained power tools.
f.Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g.Use the power tool, accessories and blades etc. in accordance with these instructions, taking into account the working condi- tions and the work to be per- formed. Use of the power tool for operations different from those intended could result in a hazardous situation.
5.Battery tool use and care
a.Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
b.Use power tools only with specifi- cally designated battery packs.
Use of any other battery packs may create a risk of injury and fire.
c.When battery pack is not in use, keep it away from other metal ob- jects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connec- tion from one terminal to another. Shorting the battery terminals to- gether may cause burns or a fire.
d.Under abusive conditions, liquid may be ejected from the battery;
avoid contact. If contact acciden- tally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
6.Service
a.Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Circular Saw Safety Warnings
1.
DANGER: Keep hands away from cutting area and the blade. Keep your second hand on auxil- iary handle, or motor housing. If both hands are holding the saw, they cannot be cut by the blade.
2.Do not reach underneath the work- piece. The guard cannot protect you from the blade below the workpiece.
3.Adjust the cutting depth to the thickness of the workpiece. Less than a full tooth of the blade teeth should be visible below the work- piece.
4.Never hold piece being cut in your hands or across your leg. Secure the workpiece to a stable platform.
It is important to support the work properly to minimize body exposure, blade binding, or loss of control.
5.Hold power tool by insulated grip- ping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a″ live″ wire will also make ex- posed metal parts of the power tool ″ live″ and shock the operator.
SKU 67026 | For technical questions, please call | Page 4 |
