Specifications
Electrical | 120 V~ / 60 Hz / 9 A (Rated) | ||
Input | |||
|
| ||
Motor | 5,600 RPM (No Load) | ||
Speed | |||
|
| ||
Chain Oil | Type | Chain/Bar/Sprocket Oil | |
Capacity | 6 oz (175 ml) | ||
| |||
| 14” Oregon | ® Bar: | |
| Model # 140SDEA041 | ||
| Sprocket nose | ||
| and |
| |
Cutting | Oregon® Chain: | ||
Attachment | Model #91PJ052X | ||
| |||
| Pitch: 3/8” |
| |
| Gauge: 0.050” | ||
| # of links: 52 |
Note: This electric chain saw is for cutting
small logs and for lighter weight trimming jobs. A more powerful chain saw may be needed for heavy duty use.
Unpacking
When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Chain Saw Features
|
|
| Front Handle | |
Lockout Switch (48) | (Behind Guard) | |||
|
| |||
Trigger Switch | Bar Oil Cap (19) | Front Handle | ||
(49) |
|
|
| |
|
|
| Guard (30) | |
|
|
|
| |
|
|
|
| Spiked Bumper |
Power |
|
|
| Chain Guide Bar (71) |
Cord |
|
|
| Saw Chain (72) |
Clip |
|
|
| |
|
|
|
| |
Power Cord | Rear |
|
|
|
(52) | Handle | Drive |
|
|
Cover
(3)
Guide
Figure 1Bar
Nose
1.Bucking - The process of cross cutting a felled tree or log into lengths.
2.Drive Sprocket or Sprocket - The Toothed part that drives the Saw Chain.
3.Felling - The process of cutting down a tree.
4.Felling Back Cut - The final cut in a tree felling operation made on the opposite side of the tree from the notching undercut.
5.Front Handle - The support handle located at or toward the front of the Chain Saw.
WARNING: To avoid possible serious injury when the Chain Saw is running, ALWAYS maintain a firm grip with one hand on the Front Handle and the other hand on the Rear Handle.
SKU 67255 | For technical questions, please call | Page 10 |