Cleaning, Maintenance, and
Lubrication Schedule
Note: This maintenance schedule is intended solely as a general guide. If performance decreases or if equipment operates unusually, check systems immediately. The maintenance needs of each piece of equipment will differ depending on factors such as duty cycle, temperature, air quality, and other factors. If you have doubts about your ability to safely service this tool, have a qualified technician service the equipment instead.
Note: These procedures are in addition to the regular checks and maintenance explained as part of the regular operation of the engine and equipment.
Weekly Maintenance:
a. Clean Guide Bar and turn over.
b. Deburr Guide Bar following manufacturer’s instructions.
c. Check Chain Sprocket for wear or damage.
Monthly Maintenance:
Clean Chain Oil Tank.
If Damaged:
a. Replace Guide Bar if it becomes bent or damaged.
b. Sharpen or replace Saw Chain.
SKU 67255 | For technical questions, please call | Page 20 |