e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused
by poorly maintained power tools.
f.Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
g.Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.
Use of the power tool for operations different from those intended could result in a hazardous situation.
5.Service
a.Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
Breaker Hammer Safety Warnings
1.Wear ear protectors. Exposure to noise can cause hearing loss.
2.Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.
3.Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a ″live″ wire will make exposed metal parts of the tool ″live″ and shock the operator.
4.Keep clear of moving parts.
5.Unplug before inspecting, removing or installing chisel, or performing any service.
6.Pull on chisel after installation and before use; chisel may move but MUST NOT slide out.
7.Wear
8.Do not operate this tool if you have back, neck, or wrist injuries, or other conditions that will be aggravated by the severe jerking forces that this tool exerts upon the operator.
9.Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
10.Avoid unintentional starting. Prepare to begin work before turning on the tool.
11.Do not lay the tool down until it has come to a complete stop. Moving parts can grab the surface and pull the tool out of your control.
12.When using a handheld power tool, maintain a firm grip on the tool with both hands to resist starting torque.
13.Do not leave the tool unattended when it is plugged into an electrical outlet. Turn off the tool, and unplug it from its electrical outlet before leaving.
14.This product is not a toy. Keep it out of reach of children.
15.People with pacemakers should consult their physician(s) before use.
Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. In addition, people with pacemakers should:
• Avoid operating alone.
Page 4 | For technical questions, please call | SKU 68147 |
