Maintenance and Servicing
Procedures not specifically explained in this manual must be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool off and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If abnormal
noise or vibration occurs, have the problem corrected before further use.
Cleaning, Maintenance, and Lubrication
1.BEFORE EACH USE, inspect general condition of tool. Check for loose screws, misalignment or binding of moving parts, cracked, bent or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation.
2.AFTER USE, wipe external surfaces of the tool with clean cloth.
3.After regular intensive use, the Carbon Brushes (22) may need to be replaced. NOTE: The Tile Saw’s motor will not function once the Carbon Brushes
wears down.
4.To replace the Carbon Brush (22):
a.Use a screwdriver to open Carbon Brush Covers (21).
b.Then remove the Carbon Brushes Holder
(8) and slide out Carbon Brush.
c.Replace with new Carbon Brush, slide Carbon Brush Holder back into housing, and replace Carbon Brush Cover.
5.
WARNING! If supply cord of power tool is damaged, it must be replaced only by a qualified service technician.
Page 10 | For technical questions, please call | SKU 68298 |
