a 14 gauge cord can carry a higher current than a 16 gauge cord. (See Table A.)

4.When using more than one extension cord to make up the total length, make sure each cord contains at least the minimum wire size required. (See Table A.)

5.If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size. (See Table A.)

6.If you are using an extension cord outdoors, make sure it is marked with the suffix “W-A” (“W” in

Canada) to indicate it is acceptable for outdoor use.

7.Make sure the extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified electrician before using it.

8.Protect the extension cords from sharp objects, excessive heat, and damp or wet areas.

Table A: RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS*

(120/240 VOLT)

NAMEPLATE

 

EXTENSION CORD

AMPERES

 

 

LENGTH

 

(at full load)

25´

 

50´

75´

100´

150´

0 – 2.0

18

 

18

18

18

16

2.1

– 3.4

18

 

18

18

16

14

3.5

– 5.0

18

 

18

16

14

12

5.1

– 7.0

18

 

16

14

12

12

7.1 – 12.0

18

 

14

12

10

-

12.1

– 16.0

14

 

12

10

-

-

16.1

– 20.0

12

 

10

-

-

-

*Based on limiting the line voltage drop to five volts at

150% of the rated amperes.

Symbology

 

Double Insulated

 

 

 

Canadian Standards Association

 

 

 

Underwriters Laboratories, Inc.

 

 

V~

Volts Alternating Current

A

Amperes

 

 

 

n0 xxxx/min. No Load Revolutions per Minute (RPM)

WARNING marking concerning Risk of Eye Injury. Wear ANSI‑approved safety goggles with side shields.

Read the manual before set-up and/or use.

WARNING marking concerning Risk of

Hearing Loss. Wear hearing protection.

WARNING marking concerning Risk

of Fire.

Do not cover ventilation ducts.

Keep flammable objects away.

WARNING marking concerning Risk of

Electric Shock.

Properly connect power cord to appropriate outlet.

SKU 68298

For technical questions, please call 1-800-444-3353.

Page 7

Page 7
Image 7
Harbor Freight Tools 68298 Symbology, Table a Recommended Minimum Wire Gauge for Extension Cords, 25´ 50´ 75´ 100´ 150´