Cleaning:

WARNING:Always dispose of paints, coating and other chemicals in a proper way. If you have questions regarding the proper disposal of any chemical, contact the chemical manufacturer for instructions.

Step 1. Depressurize the cup and disconnect the air hose.

Step 2. Remove the Paint Gun from the CUP as described in OPERATION.

Step 3. Empty the paint or coating from the CUP. Dispose of properly.

Step 4. Pour a small amount of clean solvent (as specified by the paint manufacturer) in the CUP. See Safety Warnings and Cautions.

Step 5. Place the Paint Gun into the CUP and tighten the LEVER until the assembly is sealed.

Step 6. Reconnect the air hose and pressurize the cup.

Step 7. Clean the Touch-Up Gun by shaking it vigorously and spraying the solvent through the gun.

Step 8. Repeat steps 1 through 7 until the sprayed solvent appears clean and clear.

Step 9. Disconnect the gun from the air supply.

Step 10. Remove the Paint Gun Assembly from the Cup Assembly and dispose of the surplus solvent.

Step 11. Wipe the Cup clean with a dry, lint-free cloth.

CAUTION:For thorough cleaning, the CUP may be fully immersed in solvent. DO NOT LEAVE CUP IN SOLVENT FOR MORE THAN 24 HOURS as damage may occur. Never immerse the Touch-Up Gun in solvent. When cleaning, brush solvent onto exterior parts only.

SKU 00086

For technical questions, please call 1-800-444-3353.

Page 9

Page 9
Image 9
Harbor Freight Tools 86 operating instructions Cleaning