Harbor Freight Tools 90692 To Attach The Support Bar, See Assy. Diagram, See Figure D, next

PATTERN SUPPORT BAR (41)

U-BRACKET (38)

		HANDLE (3)
		LOWER VERTICAL
		SUPPORT BAR
PATTERN BOLT (42)	(46)
		U-BRACKET
		ASSEMBLY

LOWER VERTICAL

SUPPORT BAR

(46)U-BRACKET ASSEMBLY

FIGURE C

To Attach The Support Bar:

1.Remove the End Cap (12) from each end of the Support Bar (54).

(See Assy. Diagram.)

2.Remove the two Square Nuts (47) from the Handles (48), and insert the Square Nuts into the T-Slot of the Support Bar (54).

(See Figure D, next page.)

3.Insert the threaded, bolt portion of the Handles (48) through the Lockwashers (34), Flat Washers (40), and holes in the Lower Vertical Support Bars (46). Then, screw the threaded, bolt portion of the Handles into the two Square Nuts (47) on the Support Bar (54).

(See Figure D.)

4.Replace the End Cap (12) on each end of the Support Bar (54).

(See Assy. Diagram.)

SKU 90692 PAGE 7