Manuals / Harbor Freight Tools / Power Tools / Nail Gun

Harbor Freight Tools 91044 operating instructions Operation

Models: 91044

1 12
Download 12 pages 47.34 Kb
Page 6
Image 6

Operation

Testing the Full Sequential Safety Trip Mechanism

Warning: Even though the nailer should be empty during this procedure, ALWAYS point the nailer at a piece of scrap wood when testing.

1.Make sure the tool is disconnected from the power supply.

2.Completely empty the Magazine (76) of nails.

3.The Nailer should not fire if the Safety (41) is not depressed against the workpiece.

4.Make sure the Trigger (47) and Safety (41) move freely, without sticking.

5.Connect the air supply to the tool at the Air Inlet (90). Set the regulator at the recom- mended 70 to 125 PSI.

6.Test the tool by depressing the Safety (41) against the workpiece without pulling the Trigger (47). The Tool must not cycle (fire). If it cycles (fires), stop immediately and have it repaired by a qualified service technician.

7.Hold the tool away or off of the workpiece. The Safety (41) of the tool should return to its original position. Squeeze the Trigger (47). The tool should not cycle (fire). If the tool fires, stop immediately and have it repaired by a qualified service technician.

8.Depress the Safety (41) against the workpiece and squeeze the Trigger (47). The tool must cycle (fire) only once. Release the Trigger and squeeze it again. The tool must not cycle (fire). With the Trigger held, carefully lift the nailer and press it against the workpiece again. The tool must not cycle (fire). If it fails to perform in the manner explained in bold, have it repaired by a qualified service technician.

Warning! Disconnect the Nailer from the air compressor whenever load- ing or servicing.

ALWAYS WEAR ANSI APPROVED IMPACT SAFETY GOGGLES WHEN RE- LOADING OR DOING ANY OTHER MAINTENANCE ON THIS TOOL. Other people in the work area must also wear ANSI approved impact safety goggles.

Loading Nails - See FIGURE 2 on page 7.

1.Slide the Tab (70) back and the Latch (83) will hold it in place.

2.Load a stick of nails into the top slot, making sure the nail heads are facing up.

3.Be Careful. When you pull back on the Latch (83) to release the Tab (70), it will spring forward with force. Keep your fingers clear when you release the Latch (83) and slide the Tab (70) forward.

Note: The Nailer may not work if there are only two or three nails left in the tool. If there are only a few nails remaining, simply load another strip of nails into the Magazine behind the few remaining nails and the Nailer will be ready for further use.

Rev 11/06 REV 06/05

SKU 91044

For technical questions, please call 1-800-444-3353.

Page 6

Page 5 Page 7
Page 6
Image 6
Harbor Freight Tools 91044 operating instructions Operation
Page 5 Page 7

91044 specifications

Harbor Freight Tools is known for providing a wide range of affordable tools and equipment suitable for both professional and hobbyist use. One of their standout products is the 91044, a versatile tool that has garnered attention for its performance and features.

The Harbor Freight Tools 91044 is a 3-in-1 compact woodworking machine designed to cater to various woodworking needs. This machine excels at providing the functions of a table saw, miter saw, and wood planer, all in one compact unit. This multifunctionality is particularly beneficial for those with limited workshop space because it reduces the need for multiple large machines, thus saving both space and costs.

One of the primary features of the 91044 is its powerful motor, offering consistent performance that allows users to tackle a variety of woodworking projects with ease. The machine's adjustable height and angle settings enable precise cuts and planing with minimal effort. Users appreciate the ease of adjustments, allowing for quick transitions between tasks.

Another noteworthy feature is the integrated dust collection system. This helps keep the workspace cleaner by reducing sawdust accumulation, making the clean-up process more manageable. This design also enhances safety by keeping the cutting surfaces clear and visible.

The 91044 is designed with user safety in mind, featuring safety guards to protect users from potential accidents. The clear viewing window allows users to see the cutting area without putting themselves at risk. Additionally, the stability of the machine ensures that it remains securely in place during operation, further minimizing the risk of injury.

Durability is another characteristic where the Harbor Freight 91044 shines. Made from high-quality materials, it is built to withstand the rigors of frequent use, making it a great investment for both personal and professional workshops.

In summary, the Harbor Freight Tools 91044 offers an excellent blend of features, including a powerful motor, dust collection system, and multiple functionalities, all designed to enhance the woodworking experience. Its focus on user safety and durability further solidifies its position as a valuable tool for any woodworking enthusiast.