Manuals / Harbor Freight Tools / Power Tools / Nail Gun

Harbor Freight Tools 91044 operating instructions Operating the Nailer

Models: 91044

1 12
Download 12 pages 47.34 Kb
Page 8
Image 8

Operation (continued)

Operating the Nailer

Note: The Nailer may not work if there are only 2 or 3 nails left-see Note on page 6, bottom.

1.Set the proper angle of the Nailer for your application (a three step process):

a.Pull back and engage the Tab (70), exposing three adjustment holes. Loosen the hex bolt and slide it into the appropriate hole (21°, 28°, 34°). Retighten the hex bolt securely, making sure it fits into the appropriate hole properly. See FIGURE 3. Gently release the Tab (70).

b.Remove the Adjustment Knob (81). See FIGURE 4. Move the Magazine (76) so that the desired hole on the Plate (80) lines up with the nut on the Magazine (76). See FIGURE 5. Replace and tighten the Adjustment Knob (81).

c.Inspect the Pin’s (34) location and compare it to FIGURE 6. If you are driving 21° angle nails the Pin should be in the lower hole (position A). If you are driving 28° or 34° angle nails the Pin should be in the upper hole (position B). If the Pin is in the wrong position, pull the Pin (34) out (it is held in place with a rubber washer), reposition the Guide Plate (35), and reinsert and secure the Pin (34). Before using the nailer, be sure that the Pin is properly secured.

2.The driving depth of a nail can be adjusted in two ways. First, by increasing or de- creasing air pressure (never to exceed the maximum of 125 PSI). Secondly, by loos- ening the Screw (37) and adjusting the Bracket A (38). We recommend you experi- ment in a scrap piece of material to determine how far to adjust the unit.

3.Attach the Nailer to the air supply at the Air Inlet (90). See FIGURE 1. Start your air compressor and make sure it is set to between the recommended 70-125 PSI and not over the maximum 125 PSI.

4.To fire, place the Safety (41) of the Nailer on the workpiece. The Nailer should not fire if the Safety (41) is not depressed. Once depressed, quickly squeeze the Trigger (47) once. Do not fire repeatedly; nails could bounce off of one another causing in- jury. We recommend you practice with a piece of scrap material.

5.The Exhaust Cover (4) may be turned to suit your preference. See FIGURE 1 on page 7.

6.The Rubber Cover (42) provides a non-marring surface. may be removed to expose the teeth on Safety (41). surface and can improve accuracy.

If desired, the Rubber Cover Doing so provides a nonslip

7.When finished, disconnect the Nailer from the air source.

Rev 11/06

SKU 91044

For technical questions, please call 1-800-444-3353.

Page 8

Page 7 Page 9
Page 8
Image 8
Harbor Freight Tools 91044 operating instructions Operating the Nailer
Page 7 Page 9

91044 specifications

Harbor Freight Tools is known for providing a wide range of affordable tools and equipment suitable for both professional and hobbyist use. One of their standout products is the 91044, a versatile tool that has garnered attention for its performance and features.

The Harbor Freight Tools 91044 is a 3-in-1 compact woodworking machine designed to cater to various woodworking needs. This machine excels at providing the functions of a table saw, miter saw, and wood planer, all in one compact unit. This multifunctionality is particularly beneficial for those with limited workshop space because it reduces the need for multiple large machines, thus saving both space and costs.

One of the primary features of the 91044 is its powerful motor, offering consistent performance that allows users to tackle a variety of woodworking projects with ease. The machine's adjustable height and angle settings enable precise cuts and planing with minimal effort. Users appreciate the ease of adjustments, allowing for quick transitions between tasks.

Another noteworthy feature is the integrated dust collection system. This helps keep the workspace cleaner by reducing sawdust accumulation, making the clean-up process more manageable. This design also enhances safety by keeping the cutting surfaces clear and visible.

The 91044 is designed with user safety in mind, featuring safety guards to protect users from potential accidents. The clear viewing window allows users to see the cutting area without putting themselves at risk. Additionally, the stability of the machine ensures that it remains securely in place during operation, further minimizing the risk of injury.

Durability is another characteristic where the Harbor Freight 91044 shines. Made from high-quality materials, it is built to withstand the rigors of frequent use, making it a great investment for both personal and professional workshops.

In summary, the Harbor Freight Tools 91044 offers an excellent blend of features, including a powerful motor, dust collection system, and multiple functionalities, all designed to enhance the woodworking experience. Its focus on user safety and durability further solidifies its position as a valuable tool for any woodworking enthusiast.