perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or re- placed by a qualified technician. Do not use the tool if the trigger does not oper- ate properly.

15.Guard against electric shock. Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerator enclosures.

16.Replacement parts and accessories. This product is to be repaired and ser- viced only by a qualified technician. When this product is serviced, only identical replacement parts should be used. Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools.

17.Do not operate tool if under the influence of alcohol or drugs. Read warning labels if taking prescription medicine to determine if your judgement or reflexes are impaired while taking drugs. If there is any doubt, do not operate the tool.

18.Use proper size and type extension cord. If an extension cord is required, it must be of the proper size and type to supply the correct current to the compres- sor without heating up. Otherwise, the extension cord could melt and catch fire, or cause electrical damage to the tool. Check your air compressor’s manual for the appropriate size cord. It is also possible that the use of an extension cord may cause your circuit breaker to trip or your panel fuse to break. If this happens, either use the compressor without an extension cord or find a larger amperage circuit to use.

19.Maintenance. The maintenance outlined in the maintenance section should be performed regularly. For your safety, this product should be serviced or repaired regularly only by a qualified technician.

20.Compressed air only. Never use combustible gas as a power source.

21.Do not load nails with the trigger or safety depressed. Unintentional firing may occur. Do not load nails when the air hose is connected to the tool. Always assume the tool contains fasteners.

22.Disconnect air supply before loading the Nailer. Before reloading (or making any adjustments to) the Nailer, make sure the compressed air is disconnected.

23.Fire fasteners into an appropriate work surface only. Do not attempt to fire fasteners into surfaces too hard to penetrate. Do not drive fasteners on top of other fasteners, or at too steep an angle. Fasteners can ricochet causing per- sonal injury. Never fire the Nailer into the air, or point it toward yourself or another

Skus

91053,

91054

For technical questions, please call 1-800-444-3353.

Page 4

92147,

& 92185

Page 3 Page 5
Page 4
Image 4
Harbor Freight Tools 91054, 92147, 91053, 92185 operating instructions For technical questions, please call
Page 3 Page 5

91054, 92147, 92185, 91053 specifications

Harbor Freight Tools is renowned for providing a wide range of high-quality tools at competitive prices. Among their diverse catalog, products like the 91053, 92185, 92147, and 91054 have gained notable attention for their impressive features and capabilities.

The Harbor Freight Tools 91053 is a versatile 12-inch sliding compound miter saw that delivers precision cutting for various applications. One of its main features is its dual bevel design, allowing the user to make angled cuts without having to flip the workpiece. The saw’s powerful motor provides ample torque for cutting through hardwoods and is equipped with a laser guide that ensures accuracy in cuts. The built-in dust collection system keeps the workspace clean, enhancing user convenience.

The 92185 Portable Air Compressor is another standout product that offers a portable solution for air-powered tools and inflation tasks. With its powerful 2.5-gallon tank and a 1 HP motor, this compressor delivers a consistent pressure of up to 125 PSI. Its lightweight design makes it easy to transport, while the oil-free pump requires minimal maintenance. The unit features a quick-connect coupler for easy attachment of air tools, making it an ideal choice for both DIY enthusiasts and professional contractors alike.

Moving on to the Harbor Freight 92147, the 20-Volt Lithium-Ion Cordless Drill/Driver stands out for its high performance in a compact design. This drill is equipped with a variable speed motor and a two-speed gearbox, allowing for both high torque applications and faster drilling speeds. The built-in LED light illuminates dark work areas, making it easier to operate in low-light conditions. Its ergonomic handle provides comfort during prolonged use, promoting better control over tasks.

Lastly, the 91054 20-Inch Barn Roof Panel Folding Machine is designed for professionals working with metal roofing. Its robust build ensures durability, while the ease of use allows for efficient bending and shaping of various metal materials. This folding machine is particularly praised for its accuracy, allowing users to achieve precise folds and angles with minimal effort.

In summary, Harbor Freight Tools' 91053, 92185, 92147, and 91054 offer an impressive blend of technology, performance, and usability. With features tailored for professionals and DIYers alike, these tools contribute to the brand's strong reputation for reliability and value in the tools market.
Top Page Image Contents