2.Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from hot or moving parts. Loose clothes, jewelry, or long hair can be caught in hot or moving parts.
(See page 8, number 3, for recommended safety clothing.)
3.Avoid accidental starting. Be sure the Power Switch is off before plugging in. Plugging in welding equipment with the Power Switch on invites accidents.
4.Remove adjusting keys or wrenches before turning on the welding equipment. A wrench or a key that is left attached to an electrically charged part of the welding equipment may result in personal injury.
5.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the welding equipment in unexpected situations.
TOOL USE AND CARE
1.Use clamps (not included) or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.
2.Do not force the welding equipment. Use the correct equipment for your application. The correct equipment will do the job better and safer at the rate for which it is designed.
3.Do not use the power tool if the Power Switch does not turn it on or off. Any equipment that cannot be controlled with the Power Switch is dangerous and must be replaced.
4.Disconnect the Power Cord Plug from the power source before making any adjustments, changing accessories, or storing the welding equipment. Such preventive safety measures reduce the risk of starting the welding equipment accidentally.
5.Store idle welding equipment out of reach of children and other untrained persons. Welding equipment is dangerous in the hands of untrained users.
6.Maintain welding equipment with care. Keep equipment clean and dry. Properly maintained equipment is less likely to malfunction and is easier to control. Do not use damaged welding equipment. Tag damaged equipment “Do not use” until repaired.
7.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the equipment’s operation. If damaged, have the equipment serviced before using. Many accidents are caused by poorly maintained equipment.
SKU 91146 | For technical questions, please call | PAGE 4 |
