SWIVELING THE CUTTER HEAD
1.Loosen the hex head bolt using the hex wrench provided with this tool (see figure 1 below).
2.Firmly grip the cutter head and twist it to the desired position. Tighten the hex bolt to keep the Cutter Head in that position.
WARNING: Wear leather gloves when performing this operation. You could cut your hand on the cutter blade.
Figure 1
MAINTINANCE
1.You may occasionally want to remove the Cutting Blades to clean or sharpen them. A Hex Tool is provided for you to do that.
2.Be sure the tool is unplugged before beginning work.
3.Place the tool on a workbench or other flat surface where you can easily work on it, and where you will not lose small parts.
4.Using the Hex Tool, remove the three Cap Screws and Nuts (23). Place these small parts in a safe place so they do not get lost.
5.The Fixed blades (24) and (27) will be loose, as will the Movable Blade (25) and two Bushings (26). Place the all parts in a safe place so they do not get lost.
6.Clean or sharpen the blades as required. NOTE: All maintenance should only be done by a qualified technician. Damage to this tool or loss of small parts by the owner or any unqualified person is not covered by the warranty.
7.Reassemble by repositioning the Blades, and Bushings. Replace the Cap Screws and Nuts. Tighten securely.
8.Test the product to be sure that it is working properly.
SKU 92115 | For technical questions, please call | REV 06/06 |
Page 11 |
