12.Avoid accidental starting. Be sure the Power Switch is off before plugging in. Carrying power tools with your finger on the Power Switch, or plugging in power tools with the Power Switch on, invites accidents.
13.Remove adjusting keys or wrenches before turning the power tool on. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury.
14.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations.
15.Use safety equipment. Always wear eye protection. Dust mask,
|
|
| TOOL USE AND CARE |
|
|
|
|
|
| ||
16. | Use clamps (not included) or other practical ways to secure and support | ||||
| the workpiece to a stable platform. Holding the work by hand or against your | ||||
| body is unstable and may lead to loss of control. |
| |||
17. | Do not force the tool. Use the correct tool for your application. The correct | ||||
| tool will do the job better and safer at the rate for which it is designed. |
| |||
18. | Do not use the power tool if the Power Switch does not turn it on or off. | ||||
| Any tool that cannot be controlled with the Power Switch is dangerous and must | ||||
| be replaced. |
| |||
19. | Disconnect the Power Cord Plug from the power source before making any | ||||
| adjustments, changing accessories, or storing the tool. Such preventive | ||||
| safety measures reduce the risk of starting the tool accidentally. |
| |||
20. | Store idle tools out of reach of children and other untrained persons. Tools | ||||
| are dangerous in the hands of untrained users. |
| |||
21. | Maintain tools with care. Keep cutting tools sharp and clean. Properly | ||||
| maintained tools with a sharp cutting edge are less likely to bind and are easier | ||||
| to control. Do not use a damaged tool. Tag damaged tools “Do not use” until | ||||
| repaired. |
|
|
|
|
22. | Check for misalignment or binding of moving parts, breakage of parts, and | ||||
| any other condition that may affect the tool’s operation. If damaged, have | ||||
| the tool serviced before using. Many accidents are caused by poorly main- | ||||
| tained tools. |
| |||
SKU 92115 | For technical questions, please call | Page 4 | |||
