Contents
14 GAUGE SWIVEL HEAD SHEAR
For technical questions, please call
ASSEMBLY AND OPERATING INSTRUCTIONS
92115
SAVE THIS MANUAL
PRODUCT SPECIFICATIONS
GENERAL SAFETY RULES
WORK AREA
4. Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the tool should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user
ELECTRICAL SAFETY
PERSONAL SAFETY
For technical questions, please call
TOOL USE AND CARE
Use clamps not included or other practical ways to secure and support
5. Always keep the extension cord away from moving parts on the tool
SPECIFIC SAFETY RULES
SERVICE
For technical questions, please call
8. Never lay the shear down until the motor has come to a complete stop. The tool may create unforseen risk while the motor cycles down
For technical questions, please call
GROUNDED TOOLS TOOLS WITH THREE PRONG PLUGS
outlet installed by a qualified electrician
GROUNDING
FIGURE A
FIGURE B
EXTENSION CORDS
DOUBLE INSULATED TOOLS TOOLS WITH TWO PRONG PLUGS
See Figure C, next page
FIGURE C
SYMBOLOGY
RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS* 120 VOLT
V ~ A
REV 06/06
ASSEMBLY AND OPERATING INSTRUCTIONS
UNPACKING
Swivel Head Shear Plastic Cover for Blades Hex Key
For technical questions, please call
SWIVELING THE CUTTER HEAD
MAINTINANCE
REV 06/06
TROUBLESHOOTING
For technical questions, please call
Page
Parts List
For technical questions, please call
Description
REV 06/06
Assembly Drawing
Page
For technical questions, please call
