RIGHT END | LEFT END |
KNOB I | KNOB I |
(22)(22)
FIGURE N
To Change The Saw Blade:
1.
WARNING! Make sure the Power Switch (37) of the Tile Saw is in its “OFF” position and that the unit is unplugged from its electrical outlet before performing this procedure.
2.Remove the Bolts (91), Spring Washers (89), and Washers (88) from the Blade Guard (12). (See Figure O.)
BLADE GUARD
(12)
BOLT (91) SPRING WASHER (89)
WASHER (88)
BOLT (91)
SPRING WASHER (89) WASHER (88)
FIGURE O
3.Carefully lift up and move the Blade Guard (12) aside to expose the Saw Blade
(4). (See Figure P, next page.)
SKU 92386 | For technical questions, please call | Page 18 |
