SKU 92500 For technical questions, please call 1-800-444-3353 PAGE 6
gROuNDINg
WARNINg!
Improperly connecting the grounding wire can result in the risk of electric shock.
Check with a qualified electrician if you are in doubt as to whether the outlet is
properly grounded. Do not modify the power cord plug provided with the tool.
Never remove the grounding prong from the plug. Do not use the tool if the
power cord or plug is damaged. If damaged, have it repaired by a service facil-
ity before use. If the plug will not fit the outlet, have a proper outlet installed by
a qualified electrician.

gROuNDeD TOOLs: TOOLs WITH THRee pRONg pLugs

Tools marked with “Grounding Required” have a 1.
three wire cord and three prong grounding plug.
The plug must be connected to a properly grounded
outlet. If the tool should electrically malfunction or
break down, grounding provides a low resistance
path to carry electricity away from the user, reduc-
ing the risk of electric shock. (see 3-prong plug
and Outlet.)
The grounding prong in the plug is connected 2.
through the green wire inside the cord to the grounding system in the tool. The
green wire in the cord must be the only wire connected to the tool’s grounding
system and must never be attached to an electrically “live” terminal. (see 3-prong
plug and Outlet.)
Your tool must be plugged into an appropriate outlet, properly installed and grounded 3.
in accordance with all codes and ordinances. The plug and outlet should look like
those in the following illustration. (see 3-prong plug and Outlet.)
3-prong plug and Outlet