
9.Keep children and bystanders away while operating Laser Level.
10.Inspect before every use; do not use if parts loose or damaged.
11.Stay alert, watch what you are doing and use common sense when operating Laser Level. Do not use Laser Level while you are tired or under the influence of drugs, alcohol or medication.
12.Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts.
13.Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
14.WARNING: This product contains or, when used, produces a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. (California Health & Safety Code § 25249.5, et seq.)
15.The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
Save these instructions.
Specifications
Laser Range | Projects Up to 40 ft. |
|
|
Max. Tripod Height | 48” |
|
|
Self Leveling Range | 6° |
|
|
Batteries | (3) AAA (included) |
|
|
DANGER
LASER LIGHT
AVOIDDIRECTEYEEXPOSURE
Max. Output: <5 mW,
Wavelength: 650 nm ± 10 nm
CLASS IIIa LASER PRODUCT
This product complies with
21 CFR 1040.10 and 1040.11
3491 Mission Oaks Blvd.,
Camarillo, CA, USA, 93011 Manufacture Date: ___________, _______
Unpacking
When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at
Instructions for putting
into use
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
To prevent serious injury
from accidental operation:
Turn the Power Switch to Off before adjusting Laser Level.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
SKU 92703 | For technical questions, please call | Page 3 |