SYMBOLOGY
V~
A
Double Insulated
Canadian Standards
Association
Underwriters Laboratories,
Incorporated
Volts
Alternating Current
Amperes
| No Load |
FIGURE C | noxxxx/min. Revolutions Per Minute (RPM) |
SPECIFIC SAFETY RULES
1.Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use the Charger in areas near flammable chemicals, dusts, and vapors.
2.Maintain labels and nameplates on the Charger. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
3.To avoid electrical shock, never start or run the Charger in the rain. Never allow water or other liquids to leak inside the body of the Charger.
4.Do not pull the Charger by its Power Cord or Charger Cables, or pull the Power Cord or Charger Cables around sharp corners or edges. Keep the Power Cord and Charger Cables away from heated surfaces.
5.Avoid unintentional starting. Make sure you are prepared to begin work before turning on any of the Switches on the Control Panel of the Charger.
6.Do not stand on the Charger. Standing on the Charger may cause it to tip, causing personal injury and/or product damage.
SKU 92775 | For technical questions, please call | PAGE 7 |
