![](/images/new-backgrounds/1315271/31527121x1.webp)
4” DIAMETER |
|
FLEX HOSE | CLAMP |
(NOT INCLUDED) | (NOT INCLUDED) |
TO
MACHINE
OR
VACUUM HOSE ATTACHMENT
| INLET COVER |
FIGURE E | (25) |
OPERATING INSTRUCTIONS
NOTE:
For additional information regarding the parts mentioned in
the following pages, refer to the Assembly Diagram on page 14.
1.NOTE: The Power Switch is equipped with a Safety Key (7) to prohibit unautho- rized starting of the Dust Collector. The Safety Key must be fully inserted into the Power Switch in order to turn the Power Switch to its “ON” position. When finished using the Dust Collector, turn the Power Switch to its “OFF” position. Remove the Safety Key, and store it in a safe location out of reach of children and unauthorized users. (See Figure F, next page.)
2.Insert the Safety Key (7) into the Power Switch (8), and check to make sure the Power Switch is in its “OFF” position. Then, plug the Power Cord Plug (1) into the nearest 120 volt, grounded, electrical outlet. (See Figure F.)
3.If the Dust Collector is connected to a machine, turn the Power Switch (8) of the Dust Collector to its “ON” position. Then, turn on the machine. If the Dust Collector is connected to a floor sweep accessory, hold the floor sweep acces- sory firmly to keep it from “whiplashing”. Then, turn the Power Switch of the Dust Collector to its “ON” position. (See Figure F.)
4.When finished using the Dust Collector, turn the Power Switch (8) to its “OFF” position, and remove the Safety Key (7) from the Power Switch. Unplug the
SKU 94029 | For technical questions, please call | Page 11 |