Power Cord Plug (1) from its electrical outlet. Then store the Dust Collector in a safe, clean, dry location out of reach of children and unauthorized users.
POWER SWITCH (8)
SAFETY KEY
(7)
COLLECTOR BAG (23)
BRUSH COVER (3) |
|
|
| BRUSH COVER (3) |
CARBON BRUSH (4) |
|
| CARBON BRUSH (4) | |
|
| |||
|
|
|
| |
|
|
|
| FIGURE F |
INSPECTION, MAINTENANCE, AND CLEANING
1.
WARNING! Always make sure the Power Switch (8) is in its “OFF” posi- tion, and unplug the Power Cord/Plug (1) from its 120 volt electrical outlet before performing any inspection, adjustments, maintenance, or cleaning.
2.Before each use, inspect the general condition of the Dust Collector. Check for
loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe opera- tion. If abnormal noise or vibration occurs, have the problem corrected before further use.
Do not use damaged equipment.
3.Daily: With a soft brush, cloth, or vacuum, remove all dust and debris from the exterior of the Dust Collector. Then
4.To replace the Carbon Brushes: It may become necessary at sometime to replace the two Carbon Brushes (4) when the Motor performance decreases, or
SKU 94029 | For technical questions, please call | Page 12 |
