Install A Carpet Brush, Floor Brush, Or Foam Pad
Note: The Carpet Brush (51) and Floor Brush (52) are typically used for cleaning floor surfaces. In addition, the Floor Brush may be used to apply wax to a floor surface. The Foam Pad (54) is used for buffing the floor surface after wax has been ap- plied.
1.Set the Carpet Brush (51), Floor Brush (52), or Pad (54) level on the floor surface.
(See Figure E, next page.)
2.With both hands pick up the Chassis (1) of the Floor Machine and align the machine’s Brush Holder Pad (35) with the Carpet Brush (51), Floor Brush (52), or Pad (54). Then push down firmly on the Chassis to secure the Brush or Pad in place. NOTE: The Brushes and Foam Pad fit snugly onto the Brush Holder Pad, and may require additional effort to install. (See Figure E, next page.)
SKU 94280 | For technical questions, please call | Page 10 |
