ELECTRICAL SAFETY
1.Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the tools should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user.
2.Double insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug
in any way. Double insulation 
eliminates the need for the three wire grounded power cord and grounded power supply system.
3.Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.
4.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
5.Do not abuse the Power Cord. Never use the Power Cord to carry the tools or pull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharp edges, or moving parts. Replace damaged Power Cords immediately. Dam- aged Power Cords increase the risk of electric shock.
6.When operating a power tool outside, use an outdoor extension cord marked
PERSONAL SAFETY
1.Stay alert. Watch what you are doing, and use common sense when operating this product. Do not use the Floor Machine while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating this product may result in serious personal injury.
2.Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
3.Avoid accidental starting. Make sure the Power Cord remains unplugged from its electrical outlet until this product is completely assembled and ready to use.
4.Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of this product in unexpected situations.
SKU 94280 | For technical questions, please call | Page |
