Harbor Freight Tools 94280 manual Inspection, Maintenance, And Cleaning, Troubleshooting, Problem

Models: 94280

1 15
Download 15 pages 53.98 Kb
Page 12
Image 12
INSPECTION, MAINTENANCE, AND CLEANING

INSPECTION, MAINTENANCE, AND CLEANING

1.WARNING! Make sure the Floor Machine is disconnected from its electrical outlet prior to performing any inspection, maintenance, or cleaning procedures.

2.Before each use, inspect the general condition of the Floor Machine. Check for cracked or broken parts, damaged electrical wiring, and any other condition that may affect safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use.

Do not use damaged equipment.

3.After each use, remove the Carpet Brush (51), Floor Brush (52), or Pad (54). This will allow the Brushes and Pad to dry and retain their original shape. To prolong the life and shape of the Brushes and Pad, store them face up.

4.To clean: Use a clean cloth and mild detergent to clean the exterior of the Floor Machine. Do not immerse the Floor Machine in liquid.

5.When storing, make sure to store the Floor Machine in a clean, dry, safe location out of reach of children and other unauthorized people.

6.CAUTION! All maintenance, service, or repairs not mentioned in this manual must only be performed by a qualified service technician.

TROUBLESHOOTING

Problem

 

Possible Cause

 

Possible Solution

Machine will not run.

1.

Not firmly plugged into electrical

1.

Make sure the power plug is plugged

 

 

outlet.

 

into a working, 115 volt, grounded,

 

2.

Capacitor (47A) malfunction.

 

electrical outlet.

 

 

 

 

 

 

2.

Have a qualified technician check

 

 

 

 

capacitor.

Machine bounces.

1. Using carpet brush (51) on dry

1.

Apply dry shampoo or wet shampoo

 

 

surface without dry shampoo or

 

to floor surface.

 

 

wet shampoo.

2.

Position carpet brush and/or brush

 

 

 

 

2.

Carpet brush (51) or brush holder

 

holder pad level.

 

 

pad (35) not properly in place.

 

 

Irregular noises when

1. Handle Screw (11) is loose.

1.

Retighten Handle Screw.

running.

2.

Pad Screws (25) are loose.

2.

Retighten Pad Screws.

 

SKU 94280

For technical questions, please call 1-800-444-3353.

Page 12

Page 12
Image 12
Harbor Freight Tools 94280 Inspection, Maintenance, And Cleaning, Troubleshooting, Do not use damaged equipment, Problem