Harbor Freight Tools 94519 Specifications, Save This Manual, Safety Warnings and Precautions

Models: 94519

1 8
Download 8 pages 50.51 Kb
Page 2
Image 2

Specifications

Construction

2 Solar Panels with Mounting Bracket,

Output

12 VDC 12 Watts 800 - 1000 mA

Controller and Exhaust Fan.

 

 

 

 

 

 

 

Exhaust Fan

6-¾” Dia. x 2” Thick

Voltage

Over discharge protection less than 10.5 V

3350 RPM. 251 CFM

Regulator

Over charge protection over 14.5 V

 

 

 

 

 

LED Indicator

Red indicates “Charging”, Green indicates

Fuse

3 Amp push in fuse

“Operating”

 

 

 

 

 

 

 

Dimensions

12-½” W x 36-½” L x 1” D each panel

Weight

28.5 lb. Panel Only: 9.3 lb.

 

 

 

 

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using tool, basic safety precautions should always be fol- lowed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this tool!

1.Keep work area clean. Cluttered areas invite injuries.

2.Observe work area conditions. Do not use machines or power tools in damp or wet locations. Don’t expose Control Unit to rain. Keep work area well lit. Do not use electrically powered tools in the presence of flammable gases or liquids.

3.Keep children away. Children must never be allowed in the work area. Do not let them handle machines, tools, or extension cords.

4.Store idle equipment. When not in use, tools must be stored in a dry location to inhibit rust. Always lock up tools and keep out of reach of children.

5.Use the right tool for the job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool. There are certain applications for which this tool was designed. It will do the job better and more safely at the rate for which it was intended. Do not modify this tool and do not use this tool for a purpose for which it was not intended.

6.Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective, electrically non-conductive clothes and non-skid footwear are recommended when working. Wear restrictive hair covering to contain long hair.

SKU 94519 For technical questions please call 1-800-444-3353

Page

Page 2
Image 2
Harbor Freight Tools 94519 manual Specifications, Save This Manual, Safety Warnings and Precautions