Assembly and Operation
These solar panels produce electricity when in the presence of sunlight. The amount of electricity produced increases as the sunlight becomes stronger. Less power is produced in less sunlight, but these panels will generate electricity even on cloudy days.
The enclosed mounting frame is designed to hold the solar panels at an angle to increase the amount of surface directly facing the sun. Adjust the position of the mounting frame to maximize exposure to sunlight.
These solar panels are designed to power an exhaust fan, which is ideal for green houses, sheds, boats or house vents.
Assemble the solar panel frame.
1.Press the Left and Right Triangle Frames into slots 1 and 3 on both ends of the Top Link Bar and Bottom Link bar, as shown in the diagram.
2.Push the Top Link Bar down to Slot 2 to lock the frame assembly.
3.Position the assembled frame in a location that the Solar Panels will directly face the Sun. The assembly should face the South for maximum exposure and have no obstructions in front of it. The mounting surface must be level, well constructed and capable of supporting the frame assembly and Solar Panels. The location should be out of the way of passersby and protected from damage.
4.Secure the frame assembly using hardware (not supplied) through the four holes in the bottom of the Left and Right Triangle Frames.
5.Carefully place each Solar Panel on the front of the frame assembly, so
the bottom of each Solar Panel fits into the slot of the bottom of the frame assembly.
6.Lock the two eye hooks on the backs of the Solar Panels to the bolts on the Top Link Bar to secure the Solar Panels in place.
SKU 94519 For technical questions please call | Page |
