Step 12: Flip the REVERSE VALVE (#20) to the “R” position as shown in Figure 5. This will reverse the rotation of the drill, allowing you to back out your drill bit.
Figure 5 — Reversing the Rotation of the Drill Bit
Step 13: Lightly press the TRIGGER until the drill bit spins free. Remove the Air Drill.
Step 14: Flip the REVERSE VALVE back to the “F” position.
MAINTENANCE
It is recommended that you use an Airline Oiler with your Air Drill. If you do not use an Airline Oiler, follow the steps below to maintain and prolong the life of your tool.
Step 1: Disconnect the Air Drill from the air hose.
Step 2: Apply a few drops of PNEUMATIC TOOL OIL through the air line before each use, or every hour if used continuously.
Step 3: Apply a few drops of oil to the TRIGGER (#18). Work the TRIGGER a few times to lubricate.
SKU 94585 | For technical questions please call | Page 9 |
