Arm Alarm System
On the Remote Control, press the ON button. The LED on the Remote Control will temporarily turn on. This can be done from outside the house or other protected structure.
Disarm Alarm System
On the Remote Control, press the OFF button. The LED on the Remote Control will temporarily turn on. This can be done from outside the house or other protected structure.
|
|
|
| Remote Control | |
Troubleshooting |
|
| |||
|
|
|
|
| |
Problem |
| Possible Cause |
| Probable Solution | |
|
|
|
|
| |
When system is armed, | 1. | Sensor is turned Off. | 1. | Turn Sensor On. | |
one sensor does not sound | 2. | Battery is dead. | 2. | Replace battery. | |
or signal Main Unit when | |||||
3. | Main Unit is turned Off. | 3. | Turn Main Unit On. | ||
Magnet Strip is moved. | |||||
|
|
| |||
One Sensor continues to | Magnetic Strip is placed too | Move Magnetic Strip to within | |||
sound alarm even through | far from Sensor. | ¼” of the Sensor. | |||
the door is closed. |
|
|
|
| |
|
|
|
|
| |
Main Unit does not detect | 1. | Main Unit batteries are | 1. | Replace batteries. | |
any intrusions from any |
| dead. |
|
| |
Sensors. | 2. | Main Unit is placed too | 2. | Move Main Unit closer to | |
| |||||
|
| far from the Sensors. |
| the Sensors. | |
|
|
|
|
| |
Maintenance
1.Periodically test each Sensor and Main Unit for alarm indication and sound.
2.Periodically test each Remote Control for Main Unit activation and deactivation.
3.Replace Main Unit batteries at least once a year. Replace other batteries as required.
SKU 94799 | For technical questions, please call | Page 6 |
