Harbor Freight Tools 95028 operating instructions Unpacking, Assembly and Operating Instructions

19.Industrial applications must follow OSHA requirements.

20.Warning: Use 3” Cutting Disc. Only use a standard 3” cutting disc (rated at 20,000 RPM or greater) with this Cut-Off Tool. Never use any other kind of disc, blade or cutter. Do not bind the cut-off wheel/disc.

21.Warning: Some dust created by power sanding, sawing, grinding, drilling

and other construction activities contain chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement or other masonry products, arsenic and chromium from chemically treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area and work with approved safety equipment, such as those dust masks that are specifically designed to filter out microscopic particles (California Health & Safety Code 25249.5, et seq.)

Unpacking

When unpacking, check to make sure the parts listed on page 7 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible.

Assembly and Operating Instructions

For best service, you should incorporate an oiler, regulator, and inline filter, as shown in the diagram above. Hoses, couplers, oilers, regulators, and filters are all available at Harbor Freight Tools.

Cut-Off

Tool

SKU 95028 For technical questions, please call 1-800-444-3353 Page