Housing (11), making sure to align the two mounting holes in the Chute Cover
(7)with the two threaded mounting holes in the Shredder Housing.
(See Figure F.)
2.Insert the Hopper (1) into the Chute Cover (7), making sure to align the two mounting holes in the Hopper with the two mounting holes in the Chute Cover
(7).(See Figure F.)
3.Place a Washer (3) on two Philip’s Head Screws (8). Then secure the Chute Cover (7) and Hopper (1) to the upper portion of the Shredder Housing (11) with the two Philip’s Screws. (See Figure F.)
HOPPER
(1)
PHILIP’S HEAD SCREW (8)
WASHER (3)
CHUTE COVER
(7)
FIGURE F
SHREDDER HOUSING
(11)
OPERATING INSTRUCTIONS
1.Use safety equipment. Always wear eye protection. Always wear ANSI approved safety impact goggles, heavy duty work gloves, and a dust mask or respirator when using this product. ANSI approved hearing protection must also be used.
2.Make sure the Chipper/Shredder is located on a flat, level, sturdy surface capable of supporting the weight of the Chipper/Shredder and any additional tools and equipment.
3.IMPORTANT: The Chipper/Shredder feautures a Safety Switch (48) and can only be started when the Shredder Housing (11) is correctly closed. The Wing Nut (36) is used to fasten the Shredder Housing and Lower Housing (62) together. The Wing Nut MUST be tightened securely prior to and during each use of the Chipper/Shredder. Should the Wing Nut become loose, the Chipper/Shredder will not start and/or will automatically turn itself off. (See Figure G, next page.)
SKU 95091 | For technical questions, please call | PAGE 11 |
