Operation
CAUTION: Keep all spectators a safe distance away while flying and do not fly too near to yourself.
Note: Flying any helicopter, even a dual rotor model helicopter, takes a great deal of patience and practice. Take time to get familiar with the controls of the helicopter in a location that will be relatively safe for the delicate helicopter.
Note: Read through this entire section completely and get familiar with the controls BEFORE flying the helicopter for the first time. There will likely not be time to review instructions during flight.
Direction
Control Stick
Rotation
Trim Tab
Forward/Reverse Trim Tab
(Illustration 4)
1.Extend the Antenna on the RC Transmitter. (Illustration 4)
2.Switch the Helicopter on by moving the switch on the side of the fuselage towards the tail of the helicopter.
3.Place the Helicopter on the floor with the tail facing towards you and the nose facing away. (Illustration 5)
4.Turn ON the ON/OFF Switch on the RC Trans- mitter.
5.Disarm the safety lock on the transmitter by pressing the Throttle stick all the way forward, then all the way back. The LED on the top middle on the RC Transmitter will light and stay
on. | (Illustration 5) |
6.Smoothly move the Throttle Stick forwards, the two Rotors will start spinning. The farther the Throttle Stick is moved forward, the faster the two main Rotors will spin. As the Throttle Stick is moved past center, the Helicopter will lift off.
7.Try to lift the helicopter at least three or four feet off the ground before practicing on the controls. It will be easier to control at that height.
SKU 95125 | For technical questions, please call | Page 6 |
