PSI of the tool on the Output Pressure Gauge (60), push in the knob to set the output pressure. (See Figure H.)
7.As long as the “On/Off” Pressure Switch (55) is in its ON position the operation of the Compressor is automatic, controlled by an internal pressure switch. The Compressor will turn on automatically when the air pressure drops to 80 PSI as indicated on the Pressure Gauge (54), and will turn off automatically when the air pressure reaches 115 PSI as indicated. IMPORTANT: The internal pressure switch is not user adjustable, never make changes to the air pressure levels. Any change to the automatic pressure levels may cause excess pressure to accumulate, causing a hazardous situation.
8.NOTE: If it is necessary to quickly depressurize the Compressor, turn off the Air Compressor by pushing DOWN on the “On/Off” Pressure Switch (55). Then, pull OUT on the ring on the Safety Valve (56) to quickly release stored air pressure.
9.When finished using the Air Compressor, turn it off by pushing DOWN on the ”On/Off” Pressure Switch (55). Unplug the Power Cord (64) from its electrical outlet. Squeeze the trigger on the air tool being used to release all stored air pressure from the system, and disconnect the air hose and air tool from the Air Compressor. Then, open the Drain Valve (65) to release all remaining compressed air from the Tank (1). Note: Accumulated mositure will also be discharged. (See Figure G.)
10.NOTE: The Compressor is equipped with a Reset Button (19). (See Figure I.) Should the Compressor overheat while in use, the machine will automatically shut down. If this happens, push DOWN on the “On/Off” Pressure Switch (55).
Wait for the unit to cool off (usually
RESET
BUTTON (19)
Figure I
SKU 95386 | For technical questions, please call | Page 13 |
