SERVICE

1.Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.

2.When servicing a tool, use only identical replacement parts. Follow instruc- tions in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury.

SPECIFIC SAFETY RULES AND PRECAUTIONS

1.CAUTION! Your Warranty is voided if:

a.You do not put compressor oil in the Compressor’s crankcase prior to its first use. Before each use, check the oil level. Never run the Compressor with low or no compressor oil. Running the Compressor with low or no oil will permanently damage the unit.

b.You drop the Air Compressor. Always lift the Air Compressor using its Han- dle.

2.DANGER! This Air Compressor is NOT equipped and should not be used “as-is” to supply breathing air. For any application of air for human consump- tion, you must fit the Air Compressor with suitable in-line safety and alarm equip- ment (not included). This additional equipment is necessary to properly filter and purify the air to meet minimal specifications for Grade D breathing as described in Compressed Gas Association Commodity Specification G 7.1-1966, OSHA 29 CFR 1910. 134, and/or Canadian Standards Associations (CSA). In the event the Air Compressor is used for the purpose of breathing air application and proper in- line safety and alarm equipment is not simultaneously used, existing warranties are void, and Harbor Freight Tools disclaims any liability whatsoever for any loss, personal injury, or damage.

3.DANGER! Never attempt to repair or modify the Air Tank (50). Welding, drilling, or any other modification will weaken the Tank resulting in damage from rupture or explosion. Always replace worn, cracked, or damaged Tanks.

4.Maintain labels and nameplates on the Air Compressor. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replace- ment.

5.WARNING! Never use plastic (PVC) pipe for compressed air; serious injury or death could result. Any tube, pipe, or hose used must have a pressure rating higher than 150 PSI. Minimum recommended pipe size: Up to 50 feet long use 1/2” diameter. Greater than 50 feet use 3/4” diameter. Larger diameter pipe is always better.

SKU 95499

For technical questions, please call 1-800-444-3353.

Page 4

Page 4
Image 4
Harbor Freight Tools 95499 warranty Specific Safety Rules and Precautions, Service