SYMBOLOGY
FIGURE D
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on page 14 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
ASSEMBLY INSTRUCTIONS
NOTE:
For additional information regarding the parts listed in the following
pages, refer to the Assembly Diagram on page 14.
1.
CAUTION! Always make sure the PowerSwitch (41) for the Angle Grinder is in its “OFF” position and the tool is unplugged from its electrical outlet prior to assembling the tool, adding any accessories, or making adjustments to the tool.
To Install A Grinding Wheel:
1.Unscrew and remove the Outer Flange Nut (1) from the Spindle (7).
(See Figure E, next page.)
2.Insert the Grinding Wheel (not included) onto the Spindle (7), making sure to
SKU 95578 For technical questions, please call
