![](/images/new-backgrounds/1315350/31535023x1.webp)
TROUBLESHOOTING
Problem |
| Possible Solution |
Engine will not start. | 1. | Make sure Fuel Tank is filled with a 25:1 fuel mixture. |
| 2. | Make sure Stop Button is in its “START” position. |
| 3. | Engine “flooded” with too much fuel mixture. Remove Spark Plug. Set |
| Choke Lever to its “OPEN” position. Pull Recoil Starter several times to | |
| exhaust excess fuel from the Engine cylinder. Replace Spark Plug and | |
| restart Engine. | |
| 4. | Choke Lever in wrong position. |
Engine stops soon after starting. | 1. | Make sure Fuel Tank is filled with a 25:1 fuel mixture. |
| 2. | Make sure Choke Lever is in its “OPEN” position. |
Engine overheats. | 1. | Make sure Fuel Tank is filled with a 25:1 fuel mixture. |
| 2. | Make sure the Spark Plug is of the proper size and type. |
| 3. | Make sure the Engine cylinder cooling fans are clean. |
Drive Socket does not rotate. | Make sure the Gear Change Lever is set on “R” for clockwise rotation or “L” | |
| for counterclockwise rotation. | |
Output power reduced. | Make sure Air Cleaner is free of dirt and debris. | |
Stop Button will not turn off Engine. | Immediately pull the Spark Plug Wire from the Spark Plug to stop Engine. | |
| Do not operate the Impact Wrench until a qualified service technician | |
| inspects the tool for damage and/or defects. |
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISKS AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
SKU 95666 | For technical questions, please call | PAGE 12 |