Harbor Freight Tools 95666 operating instructions Product Features, PRE-START Instructions

PRODUCT FEATURES

FIGURE A

1”

SOCKET SQUARE DRIVE (188D)

HAMMER HOUSING (171D)

GEAR OIL PORT (210D)

CENTRIFUGAL

CLUTCH

(199D)

GASOLINE

ENGINE

PRIMER (161.1C)

CHOKE LEVER (69)

RECOIL

STARTER

(125B)

SUPPORT

HANDLE

(180D)

GEAR CASE (209D)

GEAR CHANGE

LEVER (233D)

HANDLE

ASSEMBLY

THROTTLE

(107)

ASSEMBLY STOP

(102)BUTTON

(103)

PRE-START INSTRUCTIONS

To Fill The Fuel Tank:

1.IMPORTANT! Your warranty is voided if:

You do not operate the Impact Wrench with the proper 25:1 fuel mix in its Fuel Tank. Never run the Engine with an improper fuel mix, low or no fuel mix. Running the Engine with an improper fuel mix, low or no fuel mix will permanently damage the unit.

2.To obtain the proper 25:1 fuel mix, combine 25 parts unleaded gasoline with 1 part 2-cycle oil in a clean, approved container. Cover and shake to thoroughly mix before each fueling. NOTE: Mix only enough fuel for a few days work. The maximum storage time of mixed fuel is three months.

3.Once the proper fuel mix is obtained, unscrew and remove the Tank Cap (93).

SKU 95666 For technical questions, please call 1-800-444-3353 PAGE 7