4.To clean: If using liquid chemicals, flush the interior and clean the exterior of the Sprayer and its Spray Gun Assembly thoroughly with cleaning agents recom- mended by the chemical manufacturer. Then, allow to
5.When storing: Always completely empty the Sprayer of liquid. Frost will damage the Sprayer if the unit contains liquid. Store the Sprayer in an indoor area such as a garage or shed. Make sure to store the Sprayer and any chemicals in a safe, dry, clean location out of reach of children.
6.
CAUTION! All maintenance, service, and repairs not discussed in this manu- al should only be performed by a qualified service technician.
|
| TROUBLESHOOTING | |
|
|
|
|
| Problem | Possible Solution |
|
| Unit does not spray. | 1. Make sure there is an adequate amount of liquid in the Container. |
|
|
| 2. Pump the Pump Handle to pressurize the system. (Do not squeeze the Lever on |
|
|
| the Spray Gun Assembly when performing this procedure.) |
|
|
| 3. Make sure the Pump Handle is secured tightly onto the Container. |
|
|
| 4. Make sure all connections to the Container are secure. |
|
|
| 5. Make sure the Spray Head Nut is clear of dirt and debris. |
|
| Spray pattern is undesirable. | 1. Make sure the Spray Head Nut is clear of dirt and debris. |
|
|
| 2. Make sure the Sprayer is fully pressurized. |
|
SKU | For technical questions, please call | PAGE 8 |
