(14) Spray Nozzle
SPRAY NOZZLE (14)
FOUNTAIN NOZZLE (15)
Figure J
FIGURE J
7.IMPORTANT: Dogs and larger pets will probably prefer that you remove the Mushroom Head (2) and Mushroom Stand (17) and replace them with the includ- ed Spray Nozzle (14) or Fountain Nozzle
6.To install the Spray Nozzle (14) or Fountain Nozzle
a.�Re�mov�e the M�ushroom� H�ead�� (2�) and��M�ushroom� Stand�� (17�). (See Figure H.)
b.��������Separate the��� Clear����� ��Tub�e �����(12) by��unplugging����������the���90���degree������fitting�������that����plugs������
into the bottom of the Mushroom Stand (17). (See Figures A, B, and H.)
c.Separate the tw�o �Clear Tubes (1�2) at the blac��k union. Then re�mo�ve the blac��k union and the short length of the Clear Tube (12) (See Figures A and B.)
d�. To use the Spray Nozzle (14)��, slip the m�ale end�� of it (14) into the longest length of Clear Tube (12) that connects to the Water Pump (11).
To use it with the Fountain function
(See Figures A, B and J.)
e. ����Turn on�� the��� �����Water ����Pump �����(11) and���adjust�������the���water�����flow���� b��y raising��������or��lowering��������
the Black Lever (13), w�hich the Clear Tube passes through. (See Assembly diagram.)
INSPECTION, MAINTENANCE, AND CLEANING
1.WARNING! Make sure the Power Switch of the AC/DC Adapter (9) is in its “OFF” position and that the Pet Water Fountain is unplugged from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
2.BEFORE EACH USE, inspect the general condition of the Pet Water Fountain. Check for misalignment or binding of moving parts, cracked or broken parts, dam- aged electrical wiring, and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use.
Do not use damaged equipment.
REV 07j
SKU 95781 | For technical questions, please call | Page 11 |