WATER TANK STAND (16)
WATER TANK STAND (16) | BASE (1) |
FIGURE D | FIGURE E |
6.Carefully slide the Water Tank Stand (16) into the Base (1) while pulling the Power Cord of the Pump (11) out the back of the Water Tank Stand. Make sure all of the Power Cord comes out the back. (See Figure E.)
WATER TANK CAP (6)
WATER OUTLET (8)
WATER TANK GASKET (5)
WATER TANK
FIGURE F | FIGURE G |
7.Fill the Water Tank (4) with clean, cool water. Make sure the Water Tank Gasket
(5)is properly seated in the Water Tank Cap (6). Then, screw the Water Tank Cap onto the Water Tank. (See Figure F.)
8.Turn the Water Tank (4) upside down. With the black Water Outlet (8) on the Water Tank pointing to the hole in the Water Tank Stand (16), insert the Water Tank into the Water Tank Stand. (See Figure G.)
SKU 95781 | For technical questions, please call | Page |
